HINGE ROOM

Ten hinges of 3" x 3"
Sixty screws of 3.5cm x 4mm ø
Sixty M6 wall plugs
One 6mm ø drillbit for concrete
Drill
Hammer
Screwdriver
Pencil
Tape measure

  1. Enter a rectangular room.
    .
  2. Take a wall with a door as the point of departure.
    .
  3. Go to the corner on the right side of this wall.
    .
  4. Measure the height of this corner.
    .
  5. Drill six holes in the corner at one fifth of the measurement from the top, corresponding with the holes of the two blades of a hinge.
    .
  6. Insert the plugs, and mount one hinge.
    .
  7. Do the same at one fifth from the bottom.
    .
  8. Take the corner formed by the wall and the floor, on the right side of the corner used in step 3. Install hinges at one fifth from the left end, and at one fifth from the right end, as described in steps 5. and 6.
    .
  9. Repeat steps 4. upto and including 7. for the vertical corner to the right of the horizontal corner of step 8.
    .
  10. One wall now has three sides with two hinges each. Take the fourth side of that wall, the corner connecting wall and ceiling, and install two hinges as described in step 8.
    .
  11. Finish the Hinge Room by installing the last two hinges in the right corner of the opposite wall, connecting the opposite wall with the wall that was point of departure.